Cleaning, maintenance and repair
KE/KX/KG (RIGID) BAH0089-7 02.2020
161
12.12.1 Changing the coulters (workshop work)
CAUTION
Coulters are made of hardened material. If you use a hammer for the
mounting/removal procedures, the ends may break off and cause
considerable injury.
CAUTION
Take special care when changing coulters. Do not turn the bolts on
the square shaft.
Risk of injury from sharp edges.
1. Loosen the fastening nuts (Fig. 185/1).
2. Replace the worn coulters or adjust the
coulters for the operating conditions.
3. Tighten the fastening nuts (Fig. 185/1).
When changing the coulter, observe:
Mount the coulter parallel to the tool carrier
without a gap.
After 5 hours of use, check the bolt connec-
tion for tight fit.
Fig. 185
The pulling force requirement depends
in the tools used.
Tool
Pulling force
requirement
Wing coulter (Fig. 185/4)
large
Heart-shaped coulter (Fig.
185/2)
Narrow coulter (Fig. 185/3)
Small
Fig. 186
Summary of Contents for KE 2501 Special
Page 71: ...Structure and function KE KX KG RIGID BAH0089 7 02 2020 71 Fig 43...
Page 171: ...Cleaning maintenance and repair KE KX KG RIGID BAH0089 7 02 2020 171...
Page 172: ...Notes 172 KE KX KG RIGID BAH0089 7 02 2020 13 Notes Space for your notes...
