Amazone KE 2501 Special, Operating Manual

Page: 120 / 174

Settings
120 KE/KX/KG (RIGID) BAH0089-7 02.2020
8.4.1 Exceeding the maximum working depth
If increasing wear of the tool tines on the soil
tillage implement causes the maximum working
depth of the wheel mark eradicators to be ex-
ceeded (Fig. 118/2), the wheel mark eradicator
bracket (Fig. 118/1) must be installed at a higher
position

To prevent damage or wear to the tool car-
riers.

Complaints are not accepted when the max-
imum working depth has been exceeded.
Fig. 118

By turning the wheel mark eradicator brack-
et (Fig. 119/1), the working depth can be
reduced.
Fig. 119
1. Remove all of the linch pins (Fig. 120/1).
2. Grab the wheel mark eradication by the
recessed grip (Fig. 115/1)
3. Remove all of the positioning pins (Fig.
120/2).
4. Holding it by the recessed grip, remove the
wheel mark eradicator from the wheel mark
eradicator bracket (Fig. 117/3)
Fig. 120