Amazone KE 2501 Special, Operating Manual

Page: 137 / 174

Use of the implement
KE/KX/KG (RIGID) BAH0089-7 02.2020 137
10.3 During operation
In the event of tine wear, correct the following settings:

the working depth of the soil tillage implement,

the side panels,

the wheel mark eradicators.
When working at great working depths, it is necessary to replace the
tool tines with new ones even before they reach the minimum length
in order to prevent damage or wear to the tool carriers.
The working depth (Fig. 147/1) can be adjusted
hydraulically during operation.
Fig. 147
Actuation of the control unit (
beige
) adjusts the
working depth of the rotary cultivator.
Lock the control unit (
beige
) after each adjust-
ment.
The scale (Fig. 147/2) displays the set working
width.
10.3.1 Turning at end of the field
Switch off the tractor PTO shaft when turning if the angle of the uni-
versal joint shaft becomes too large or the implement does not run
smoothly when raised.
Before turning at the end of the field

raise the mounted seed drill over the packer
roller using the lifting frame (optional)

raise the combination with the tractor hy-
draulics until the combination has sufficient
ground clearance.
Fig. 148