6.
If the implement has an upper drawbar,
then route both cables through the guide
1
.
7.
Route the cable with sufficient freedom of
movement and without chafing points.
1
CMS-I-00001059
6.7.5 Coupling the implement with the upper drawbar
1.
Pull the coupling pin on the tractor.
2.
Drive the tractor towards the implement.
3.
Secure the drawbar eye
1
of the implement on
the straight drawbar with coupling pins
2
.
1
2
CMS-I-00001047
4.
Remove the linch pin
1
.
5.
Pull out the safety clip
2
from the pin from the
side.
6.
Insert the linch pin in the pin and secure it.
CMS-I-00001062
CMS-T-00001683-A.1
6 | Preparing the machine
Coupling the implement
MG6212-EN-II | C.1 | 12.04.2021
70
