9.1.2 Checking the drive belt
INTERVAL
Every 50 operating hours
or
weekly
1.
Remove the protective cover
1
.
2.
Check the belt tension on all 4 drive belts
2
.
3.
Have the belts tensioned in a specialist workshop.
4.
Check all 4 cutting deck drive belts for damage
and wear.
5.
Damaged and worn drive belts must be
immediately replaced by a specialist workshop.
6.
Put on the protective cover.
CMS-I-00003415
9.1.3 Checking the hydraulic hose lines
INTERVAL
After initial operation
Every 50 operating hours
or
weekly
1.
Check the hydraulic hose lines for damage, such
as chafing point, cuts, tears and deformation.
2.
Check the hydraulic hose lines for leaks.
3.
Check the date of manufacture
1
.
NOTE
Hydraulic hose lines must not be more than 6
years old.
4.
Have any damaged or aged hydraulic hose lines
immediately replaced by a specialist workshop.
5.
Retighten loose bolted connections.
CMS-I-00000532
CMS-T-00004795-A.1
CMS-T-00004796-A.1
9 | Repairing the machine
Maintaining the machine
MG6212-EN-II | C.1 | 12.04.2021
116
