manualshive.com logo in svg

Amazone GHS 1500 Drive SmartCut, Original Operating Manual

Share
Download
Amazone GHS 1500 Drive SmartCut Original Operating Manual Download Page 25

Maintenance work

Improper maintenance work, particularly
on safety-related components, endangers
operational safety. This can result in accidents
and serious personal injury or even death.
Safety-related components include, for example,
hydraulic components, electronic components,
frames, springs, trailer coupling, axles and
axle suspensions, lines and tanks containing
flammable substances.

Before you adjust, maintain or clean the
machine,

secure the machine.

Repair the machine according to this
operating manual.

Only perform the work that is described in
this operating manual.

Maintenance work that is not described in this
operating manual should only be performed
by a qualified specialist workshop.

Maintenance work on safety-related
components should be performed only by a
qualified specialist workshop.

Never perform welding, drilling, sawing,
grinding, and cutting work on the frame,
running gear or coupling devices of the
implement.

Never modify safety-related components.

Never drill out existing holes.

Perform all maintenance work at the
prescribed maintenance intervals.

2 | Safety and responsibility

Basic safety instructions 

MG6212-EN-II | C.1 | 12.04.2021

19

Summary of Contents for GHS 1500 Drive SmartCut











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands