13.
To release the locking mechanism of the grass
collector,
turn the hydraulic valve
1
to the
2
position.
1
2
CMS-I-00003342
14. Open the hydraulic valves
1
.
15. Start the tractor.
16. Completely lower the grass collector.
1
1
CMS-I-00003728
6.9.7 Adjusting the cutting height
REQUIREMENTS
The PTO shaft drive is switched off.
1.
Open the drawbar hydraulic valve
1
.
2.
Open the cutting deck hydraulic valve
2
.
NOTE
The hydraulic cylinder of the drawbar and
the hydraulic cylinder of the cutting deck are
connected in parallel. When both hydraulic valves
are open, the hydraulic cylinders of the drawbar
and cutting deck are actuated simultaneously.
1
2
CMS-I-00003367
CMS-T-00004721-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6212-EN-II | C.1 | 12.04.2021
85