Amazone GHS 1500 Drive SmartCut Original Operating Manual Download Page 56

Page: 56 / 138

5.5 Permitted mounting categories

Upper drawbar

Drawbar eye D40

Lower drawbar

Drawbar eye D50

5.6 Optimal working speed

5 - 12 km/h

5.7 Performance characteristics of the tractor

Engine rating

GHS Drive 1500

GHS Drive 1800

GHS Drive 2100

minimum 50 HP / maximum 100

minimum 60 HP / maximum 120

minimum 70 HP / maximum 130

Electrical system

Battery voltage

12 V

Lighting socket

7-pin

Socket for electro-hydraulic control

3-pin, 15 A

Hydraulic system

Maximum operating pressure

210 bar

Tractor pump output

At least 15 l/min at 150 bar

Tractor pump capacity for electro-hydraulic control

max. 40 l/min at 210 bar

Free oil return

max. return pressure 1.5 bar

Implement hydraulic oil

HLP68 DIN51524

The hydraulic fluid is suitable for the combined

hydraulic fluid circuits of all standard tractor brands.

Control units

Standard hydraulic system:

2x single-acting and 1x double-acting

Electro-hydraulic control:

1x single-acting and free return to the tank

CMS-T-00003698-A.1

CMS-T-00003696-A.1

CMS-T-00003697-A.1

5 | Technical data

Permitted mounting categories

MG6212-EN-II | C.1 | 12.04.2021

Summary of Contents for GHS 1500 Drive SmartCut











































































































































Search results

Summary of Contents for GHS 1500 Drive SmartCut

Reviews:

Related manuals for GHS 1500 Drive SmartCut

Brands by name

Popular brands

Amazone GHS 1500 Drive SmartCut, Original Operating Manual

Search results

Summary of Contents for GHS 1500 Drive SmartCut

Reviews:

Related manuals for GHS 1500 Drive SmartCut

Brands by name

Popular brands