The set BUS mode is shown in the main menu
1
.
2
Checking the AUX-N assignments
Each time the AMATRON 3 is restarted, the assignment
of the external input devices must be checked and con-
firmed for safety reasons. The AMATRON 3 only recog-
nises external input devices in ISOBUS mode.
A list with the device functions will be opened. The dis-
played device functions depend on which device is rec-
ognised first.
1. Scroll through the assignment list with
and
.
2.
If the AUX‐N assignments should be changed,
or
If the AUX‐N assignments are correct,
confirm the AUX-N assignments.
009912
E | After switching on | Checking the AUX-N assignments
MG5560-EN-II
| B.1 | 2016.07
19
