Using the job management
J
Job management can be used to process jobs in ISO-
XML format. The ISO-XML jobs can be created with a
Farm Management Information System (FMIS) and im-
ported to the AMATRON 3 with a USB flash drive. Alter-
natively, the jobs can be created and edited on the AMA-
TRON 3.
From a job in ISO-XML format, the field boundaries and
application maps can be processed with GPS switch.
Two types of application maps can be imported:
Map type 1: This type of map is displayed on the
GPS switch map. The stored setpoints are transmit-
ted to the implement and processed.
Map type 2: This type of map is not displayed on the
GPS switch map. The stored setpoints are transmit-
ted to the implement and processed.
When a job has been started on the AMATRON 3, the
field boundaries and the application map are displayed
on the GPS switch map and the job data is recorded.
The recording of job data depends on the created ISO-
XML job and the connected implement.
Among others, the following job data can be recor-
ded:
Application/spread rates
Application positions
Operating time of tractors and implements
The finished jobs can be exported and further processed
with a Farm Management Information System (FMIS).
REQUIREMENTS
Job management is enabled, see page 23
USB flash drive is inserted
006872
J | Using the job management |
MG5560-EN-II
| B.1 | 2016.07
53
