LEVIGATO DRIVES (LG SERIES)
|
LEVIGATO ANTRIEBE (SERIE LG)
|
COMMANDES LEVIGATO (SERIE LG)
12
GENERAL WARNINGS AND SAfETy RULES
1.
GENERAL WARNINGS AND SAfETy RULES
1.1
GENERAL INfORMATION
Y
ATTENTION!
This manual contains important information concerning safety. Before
installation and operation study closely all the information provided below. Save this manual
for future reference!
Follow safety and health regulations provided by any active regulatory documents and by those
in this manual. Failure to comply with the rules can lead to serious damage, injury or death.
Please, ensure compliance with the requirements of standards concerning the design, mounting
and operation of automated doors (EN 12604, EN 12453), as well as other possible local rules
and regulations.
Y
ATTENTION!
Mounting, connections, adjustment, commissioning, maintenance, disassembly
and disposal of the product should be performed only by qualified (professional) and trained
specialists (EN 12635), competent and specialized organizations.
Mounting, programming, adjustment and operation of the product in violation of the require-
ments are prohibited, as this can result in damages, injuries and cause losses.
Improperly use of the product or making any changes in any elements of the product design are
prohibited. The manufacturer is not liable for any damages, caused by unauthorised changes in
the product or its improperly use.
When performing any works (mounting, repair, maintenance, cleaning etc.) and connections
inside the drive, disconnect the mains circuit. If the master switch or similar device is out of
sight, then attach a safety sign stating: ‘Do not turn on. People are working’ and take measures
preventing the possibility of accidental restoring the power supply.
The manufacturer and supplier do not directly control the doors installation, maintenance and
operation of the drive and automation devices, and are not responsible for the safety of operation
and maintenance of the product.
The company reserves the right to introduce changes in this manual and the product construc-
tion without prior notification, but preserving the same functional capabilities and designation.
The content of this manual cannot be used as the basis for legal claims.
1.2
DURING INSTALLATION
Y
ATTENTION!
The condition of all components and materials should be applicable for use and
should comply with applicable regulations. The applied instruments and materials should be
in good repair and should comply with the safety norms, standards and instructions.
The door design should be suitable for automation, and should be in good mechanical condition.
The elements of the door design shall not be located in the public pedestrian area or on the road.
Before the drive mounting, make sure that the door leaf is balanced and when releasing it remains
stationary in any position. Easy movement of the door leaf when opening and closing is provid-
ed. The force, when moving the door leaf manually should be no more than 150 N (EN 12604).
Door dimensions and specifications should be within acceptable limits (section 2.2. ‘Technical
specifications’). The installation location must correspond to the declared temperature operating
range indicated on the drive marking.
