LEVIGATO DRIVES (LG SERIES)
|
LEVIGATO ANTRIEBE (SERIE LG)
|
COMMANDES LEVIGATO (SERIE LG)
24
ADjUSTMENT
SBS
— the step-by-step control mode.
Sequence of commands
OPEN
—
STOP
—
CLOSE
—
STOP
—
OPEN
…
OP
— the
OPEN
control mode. The command to open the doors
CL
— the
CLOSED
control mode. The command to close the doors
STOP
—
STOP
control mode. The command to stop the doors
PE
— the pedestrian position control mode. The command for partial opening of door, if the partial
position of door is set (setting
P1
–
f2
)
LL
— the light lamp mode. If the door does not move, the commands to turn on and off the built-in
lighting of the drive (illumination) and lamp connection output
SL / LL
are executed. The
SL / LL
output is controlled with the remote if the light lamp
LL
output has been set up (
P8
–
f4
setting)
Recording the remote controls
Y
ATTENTION!
If you need to overwrite a previously recorded remote control (when you need
to record another button of the remote or record the remote in another mode), it must first be
deleted from memory!
The pressed button when recording will control the remote in the first mode in the list (
tab
. 10).
All other buttons of the remote control will be recorded automatically in the order specified in
the
table 10
modes (refers to the settings in which several buttons are recorded).
MODE
SETTING
f1
f2
f3
f4
f5
f6
1
SBS
SBS
SBS
SBS
OP
OP
2
—
PE
LL
PE
STOP
STOP
3
—
—
—
LL
CL
CL
4
—
—
—
—
PE
LL
In the case of
f1
-
f4
settings, the unused buttons of the remote control can be recorded for
control in other ALUTECH products, where
AT-4N
remote control can be recorded.
1
Press and hold the button
for about 5 secs to enter the
programming mode
2
After the appearance of ‘
P1
’
inscription press the button
3
After the appearance of ‘
P2
’
inscription press the button
4
Using the button
or
select the required setting of remote
control recording in the menu ‘
f1
…
f6
’
5
After the appearance of required setting press the button
Table 10
Table 11
