Alutech CU-TR230, Installation And Operation Manual

Page: 88 / 138

CONTROL UNITS СU-TR230 / СU-TR400
86 86
SAFETY RULES AND WARNINGS
1. SAFETY RULES AND WARNINGS
1.1 GENERAL
Y
ATTENTION!
This original manual contains important safety information. Please read all in-
formation below carefully before installation and operation. Keep this manual for future ref-
erence!
Follow the safety and labor protection rules regulated by current normative documents and
this manual. Failure to comply with the rules can lead to serious damage, serious injury and in-
jury, death.
Observe the requirements of standards regarding the design, installation and door operation
(EN 12604, EN 12453), as well as other possible local rules and regulations.
Y
ATTENTION!
Installation, connections, adjustment, commissioning, maintenance, dismantling
and disposal of the product must be carried out by qualified (professional) and trained special-
ists (EN 12635), competent and specialized organizations. Installation, programming, adjust-
ment and operation of the product in violation of the requirements of this manual is not al-
lowed, as this can lead to damage and personal injury.
Do not start installation and operation of the product if you have any questions or if you do not
understand anything. If necessary, contact your nearest ALUTECH service or office.
It is not allowed to make changes to any elements of the product design and use the product
for other purposes. The manufacturer is not responsible for any damage caused by unauthor-
ized changes to the product or misuse. When carrying out any work (installation, repair, mainte-
nance, cleaning, etc.) and electrical connections, disconnect the power circuit. If the switching
device is out of sight, attach a plate: ‘Do not switch on. People are working’ and take measures
to eliminate the possibility of erroneous voltage supply.
The manufacturer and supplier do not exercise direct control over the installation of the prod-
uct, and are not responsible for the safety of installation, operation and maintenance of the
product.
The company reserves the right to make changes to this manual and product design without
prior notice, while maintaining the same functionality and purpose. The contents of this man-
ual can not serve the basis for legal claims.
1.2 DURING INSTALLATION
Y
ATTENTION! The condition of all components and materials must be suitable for use and com-
ply with applicable regulatory documents. The used tools and materials must be in full working
order and comply with applicable safety regulations, standards and instructions.
Make sure that the product is used correctly (section ‘2. Product description’). The installation
location of the product must comply with the declared temperature operating range indicat-
ed on the product label.
Please, read the installation, operation and maintenance manual for the doors and the drive;
follow the provided instructions and recommendations. Poor installation of the doors and the
drive, or the damages in the construction can lead to serious injuries.
The doors should be in good mechanical condition, technically intact, properly balanced for
closing and opening manually (ЕN 12604). Uncontrolled dangerous movements of the door
leaf after stopping are not allowed. The doors should be equipped with protective devices and