Alutech CU-TR230, Installation And Operation Manual

Page: 90 / 138

CONTROL UNITS СU-TR230 / СU-TR400
88 88
SAFETY RULES AND WARNINGS
1.3 DURING OPERATION
Y
ATTENTION! The product should not be used by children or persons with limited physical, sen-
sory or mental abilities, as well as persons with insufficient experience and knowledge, who
have not been instructed about the use.
Do not let children play with control devices. Keep remote controls out of the reach of children.
Never grab onto moving doors or moving parts.
Make sure that there are no people, animals, vehicles or objects in the danger area before set-
ting the doors in motion. Observe the movement of doors until they open or close complete-
ly. Passage is allowed when the doors are open, have completely stopped and motionless. Pas-
sage is forbidden when the doors are moving.
Do not stay (stop) in the zone of door movement. Automatic doors may be set in motion at an
unexpected moment!
Inspect the drive system and doors regularly, in particular verify cables, springs, and mounting
hardware for signs of wear, damage, or imbalance. It is forbidden to use a product requiring re-
pair or adjustment, as a defect in installation and operation can lead to personal injury or dam-
age to the product.
Monthly verify the operation of safety devices (safety edge, photocells, STOP devices, stop-
ping the movement and others). Malfunction and faulty operation of safety devices can re-
sult in injury.
The product is not intended for use in acidic, salty or explosive atmospheres, on evacuation
routes and emergency exits.
Foreign objects, materials from construction works, water or other liquid should not be inside
the product and other electrical devices of the drive system. Operation of equipment in this
condition is prohibited.
Sources of heat and open flames must be removed a sufficient distance from the product. Vi-
olation of this requirement can lead to damage to the product, cause its malfunction, lead to
dangerous situations.
The product as part of the drive system must be serviced regularly to ensure efficient and safe
operation. Maintenance and repairs must be documented by the persons performing them, and
the owner must keep these documents.
Do not use the product if repairs are required!