MOUNTING THE ROOF HOOKS
Please note:
-
The
AL13 roof hook
can be adjusted in
3 directions
to ensure the
required minimum gaps can be adhered to easily. Tighten the fixing
screws to a torque of
15Nm
.
-
Holes of approx.
0.7 x screw diameter
must be
pre-drilled
in the
wooden substructure..
-
Ensure you only cut away part of the lip of the tile and do not cut into
the tile.
-
When mounting the sheet metal tile, make sure you use the
manufacturer’s installation instructions.
If necessary, remove a section of the lip of the next tile
down
using an
angle grinder (diamond blade).
Optionally, the tile below the roof hook can be replaced with a sheet metal
tile. Remove the lip of the tile
above
with an angle grinder (diamond blade).
Use a string to find the right position for the hook along the horizontal
plane and attach it with two
2 plate head screws
driven into the rafter.
Make sure there is a screw in every row of holes.
Please note:
Once mounted, roof hooks must not
be used as footholds!
8
Summary of Contents for AS 2.1
Page 1: ...TILED ROOFS AS 2 1 EN SOLAR INSTALLATION INSTRUCTIONS 1 ...
Page 6: ...MOUNTING WITH ROOF HOOKS VERTICAL MODULE ARRANGEMENT SINGLE DIRECTION 6 ...
Page 14: ...MOUNTING TRUSS PROFILES IN A LATTICE ARRANGEMENT HORIZONTAL MODULE ARRANGEMENT 14 ...
Page 18: ...MOUNTING WITH AL13 X ROOF HOOKS VERTICAL MODULE ARRANGEMENT LATTICE 18 ...