ALUMERO AS 2.1, Installation Instructions Manual

Page: 23 / 28

2
All graphic representations of products provided in these installation
instructions are for demonstration purposes and are not perfectly-
scaled images. Subject to changes and errors!
DONE!
EARTHING MODULES
The module manufacturer specifies in the respective data sheet as to whether the par-
ticular module needs to be earthed. If this is the case, equipotential bonding for your
modules can be implemented in the following ways – as recommended by ALUMERO:
ALUMERO end and middle clamps can be used with built-in pin switches to integrate
your modules into the equipotential bonding network. These pins are situated in the
clamps and puncture the anodised layer of the module frames, thus connecting up all
the rows of modules into a circuit.
Click end clamp
with a pin switch
Click middle clamp
with a pin switch
23