Altuscn KN2116a, User Manual, Page: 235 / 306

219
Chapter 14
LDAP Server Configuration
Introduction
The KVM Over the NET™ switch allows log in authentication and
authorization through external programs. This chapter describes how to
configure Active Directory for KVM Over the NET™ authentication and
authorization.
To allow authentication and authorization via LDAP or LDAPS, the Active
Directory’s LDAP
Schema must be extended so that an extended attribute
name for the KVM Over the NET™ switch – iKVM4140-userProfile – is
added as an optional attribute to the person class.
Note: Authentication refers to determining the authenticity of the person
logging in; authorization refers to assigning permission to use the
device’s various functions.
In order to configure the LDAP server, you will have to complete the following
procedures: 1) Install the Windows Server Support Tools; 2) Install the Active
Directory Schema Snap-in; and 3) Extend and Update the Active Directory
Schema.
The following section provides an example of configuring LDAP under
Windows 2003 Server.
Install the Windows 2003 Support Tools
To install the Windows 2003 Support Tools, do the following:
1. On your Windows Server CD, open the Support
→
Tools folder.
2. In the right panel of the dialog box that comes up, double click
SupTools.msi .
3. Follow along with the Installation Wizard to complete the procedure.