Altuscn KN2116a, User Manual, Page: 107 / 306

Chapter 6. Port Access
91
Filter
Filter allows you to control the number and type of ports that display
in the Sidebar, as well as which ports get scanned when Auto Scan and
Array Modes are invoked (see Scan and Array , above). When you click Filter ,
the bottom of the panel changes to look similar to the image, below:
The meanings of the choices are explained in the following table:
Choices Explanation
All This is the default view. With no other filter options selected,
all of the ports that are accessible to the user are listed in the
Sidebar.
If any Favorites have been specified (see page 108), you can
drop down the list box and select Favorites instead of All. If
you select Favorites, only the items you have selected as
Favorites display in the tree.
Powered On If you enable Powered On (by putting a check in the
checkbox) only the ports that have their attached devices
powered on display in the tree.
Search If you key in a search string and click Search , only port names
that match the search string display in the tree. Wildcards (?
for single characters; * for multiple characters) and the
keyword
or are supported, so that more than one port can
show up in the list.
For example:
1. If you key in Web* , both Web Server 1 and Web Server 2
show up in the list.
2. If you key in W*1 or M*2 , both Web Server 1 and Mail
Server 2 show up in the list.
Exit Clicking Exit closes the filter dialog.