Altuscn KN2116a, User Manual, Page: 173 / 306

Chapter 8. Device Management
157
3. If your server requires authentication, put a check in the My server
requires authentication checkbox, and key in the appropriate account
information in the Account Name and Password fields.
4. Key in the email address of where the report is being sent from in the
From field.
Note: 1. Only one email address is allowed in the From field, and it
cannot exceed 64 Bytes.
2. 1 Byte = 1 English alphanumeric character.
5. Key in the email address (addresses) of where you want the SMTP
reports sent to in the To field.
Note: If you are sending the report to more than one email address,
separate the addresses with a semicolon. The total cannot exceed
256 Bytes.
Š
Log Server
Important transactions that occur on the KVM Over the NET™ switch,
such as logins and internal status messages, are kept in an automatically
generated log file.
Š
Specify the MAC address of the computer that the Log Server runs on
in the
MAC address field.
Š
Specify the port used by the computer that the Log Server runs on to
listen for log details in the
Port field. The valid port range is 1–65535.
The default port number is 9001.
Note: The port number must different than the one used for the Program
port (see Program , page 152).
See Chapter 13, The Log Server , for details on setting up the log server.
The Log File is discussed on page 183.