4. Configuration
215
Watch Group
Group created to define access rights to users who can only view without making any modification in
the application, if not used this group can be deleted.
Administrator User
The Administrator user is defined in the Everyone and Administrator groups. The default password
for the Administrator user is "Administrator" and can be modified.
Everyone User
The user Everyone is set to Everyone and Administrator groups. This user has no password set.
Users And Groups Of Old Projects
To keep the users and groups of an outdated project after a firmware update in a CPU or in new
Xtorm UCPs its necessary in the old project with the original firmware execute the command
Upload
from Device
, thus seeking the CPU settings, and after, the command
Save to Disk
, thus saving the
current configuration to a file.
In the new XTorm UCP or the updated UCP, execute the commando
Load from Disk
, and select the
previously generated file, finally, execute the command
Download to Device,
thus sending the
settings to the CPU.
Access Rights
This dialogue is provided on a
Device
dialog tab (Device Editor). It is part of the
Online Users
Management
and serves to grant and deny permissions to certain user group defined at the time, thus
determining the access rights to files and objects (an application, for example) when the CPU is
running.
Note that these permissions can only be assigned to groups and not to single users. Therefore, a user
must be defined as a member of a group. The configuration of users and groups is done in the device
editor
Users and Groups
tab.
The Figure 4-83 shows the permission to add and remove child nodes to / CPU Logic object granted
to the user group
Everyone
e
Owner
.
Figure 4-83. Device, Access Rights
