4. Configuration
211
: The right to perform one or more actions selected in the
Actions
window is not guaranteed
explicitly, but by default, due to that right has been guaranteed to the "main" object. Basically
this is the default setting for all the rights that have not been explicitly configured.
: the right to perform one or more actions selected in the
Actions
window is not explicitly
denied, but by default, for example, in cases where that right has been assigned to the main
object.
The icons are not displayed if they are selected several actions without the unique settings for the
selected group at the time.
To configure rights to a group, select an action and the desired group in
Actions
and
Permissions
respectively. After, use the appropriate buttons in the window toolbar
Permissions
:
: Grant explicitly
: Deny explicitly.
: Clear the rights guaranteed to a selected action in the window
Actions
will be
excluded (default Configuration will return).
UCP’s User Management and Access Rights
The HX3040 CPUs have a user permissions management system, which blocks or allows certain
actions for each group of users in the CPU. To edit these rights in the CPU, the user needs to access a
project in MasterTool Xtorm software without the need to be logged in the CPU. User should them
click in Devices Tree, located at the left of the software, double click the item
Device
, after select
CPU in
Communication Settings
tab that will be opened. Only
Users and Groups
e
Access Rights
tab
are related to this topic. The Figure 4-79 exemplifies the steps to access those tabs in the CPU.
Figure 4-79. User and Groups and Access Rights tabs access
ATTENTION:
If user forgets the password(s) of the account(s) with UCP access, the only way to recover it will be
updating the firmware version of the CPU.
