4. Configuration
59
4. Configuration
The Hadron Xtorm Series CPU is configured and programmed through the MasterTool Xtorm
software. Its configuration defines the behavior and utilization modes for peripherals and CPUs
special features. The programming represents the application developed by the user, also known as
applicative.
CPU Configuration
The parameters below are part of the CPU configuration inserted in the application. Each item must
be correctly revised for the proper execution of the project.
Besides these parameters, it is possible to change the name and description of each module inserted
in the application by clicking with the right button on the module. In the “Properties” item from the
“Common” tab, change the name/description, within the maximum of 255 characters.
The rules and guidelines on tags, descriptions and names of I / O modules can be found in the section
“Accessing the module and I/O points description”.
ATTENTION:
It is recommended the use of alphanumeric characters (uppercase or lowercase; not starting with
numbers) in the name of each module. For the description it is also recommended the use of
alphanumeric characters (uppercase or lowercas), blank spaces and the “.” character. It is not
recommended the use of any other character different from the ones mentioned above.
ATTENTION:
When using the ETD - Electronic Tag on Display function to display the description of the module
on the graphic display, the module description will be truncated in the first 48 characters of the
description.
ATTENTION:
When using the ETD - Electronic Tag on Display function, Diagnostic Explorer or Web Server to
view the module name, this will be truncated in the first 24 characters of the description.
