manualshive.com logo in svg

Altera Arria V GZ, User Manual

The Altera Arria V GZ User Manual is now available for free download at manualshive.com, ensuring convenient access to essential instructions for this high-performance product. This comprehensive manual equips users with comprehensive details and troubleshooting guidance, enabling optimal utilization of the Altera Arria V GZ.

Share
Download
background image

November 2012

Altera Corporation

Arria V GZ Hard IP for PCI Express

User Guide

14. SDC Timing Constraints

You must include component-level Synopsys Design Constraints (SDC) timing 
constraints for the Arria V GZ Hard IP for PCI Express IP Core and system-level 
constraints for your complete design. The example design that Altera describes in the 

Testbench and Design Example

 chapter includes the constraints required for the for 

Arria V GZ Hard IP for PCI Express IP Core and example design. A single file, 

<install_dir>

/ip/altera/altera_pcie/altera_pcie_hip_ast_ed/altpcied_sv.sdc

, includes 

both the component-level and system-level constraints. 

Example 14–1

 shows 

altpcied_sv.sdc

. This 

.sdc

 file includes constraints for three components:

■

Arria V GZ Hard IP for PCI Express IP Core

■

Transceiver Reconfiguration Controller IP Core

■

Transceiver PHY Reset Controller IP Core

SDC Constraints for the Hard IP for PCIe

In 

Example 14–1

, you should only apply the first two constraints, to derive PLL clocks 

and clock uncertainty, once across all of the SDC files in your project. Differences 
between Fitter timing analysis and TimeQuest timing analysis arise if these 
constraints are applied more than once.

Example 14–1. SDC Timing Constraints Required for the Arria V GZ Hard IP for PCIe and Design Example

# Constraints required for the Hard IP for PCI Express 
# derive_pll_clock is used to calculate all clock derived from PCIe refclk
# the derive_pll_clocks and derive clock_uncertainty should only be applied
# once across all of the SDC files used in a project

derive_pll_clocks -create_base_clocks
derive_clock_uncertainty

##############################################################################
# PHY IP reconfig controller constraints
# Set reconfig_xcvr clock
# this line will likely need to be modified to match the actual clock pin name
# used for this clock, and also changed to have the correct period set for the actually 
# used clock
create_clock -period "125 MHz" -name {reconfig_xcvr_clk} {*reconfig_xcvr_clk*}
######################################################################

# HIP Soft reset controller SDC constraints
set_false_path -to   [get_registers *altpcie_rs_serdes|fifo_err_sync_r[0]]
set_false_path -from [get_registers *sv_xcvr_pipe_native*] -to [get_registers 
*altpcie_rs_serdes|*]

# Hard IP testin pins SDC constraints
set_false_path -from [get_pins -compatibilitly_mode *hip_ctrl*]

Summary of Contents for Arria V GZ













































































































































































































































































































Reviews:

No comments

Related manuals for Arria V GZ

ICS Advent WDT1000-P Product Manual preview
WDT1000-P
Brand: ICS Advent Pages: 34
Creative X-FI FATAL1TY - SB X-FI PLATINIUM FATAL1TY QUICKSTART BACK EN FR DE IT ES NL User Manual preview
X-FI FATAL1TY - SB X-FI PLATINIUM FATAL1TY QUICKSTART BACK EN FR DE IT ES NL
Brand: Creative Pages: 1
Gigabyte GV-N94T-512H User Manual preview
GV-N94T-512H
Brand: Gigabyte Pages: 40
Stanley GS3LFM Installation Manual preview
GS3LFM
Brand: Stanley Pages: 48
Transcend HD Video Card Series Datasheet preview
HD Video Card Series
Brand: Transcend Pages: 24
SMC Networks EZ Connect SMCWPCI-N2 User Manual preview
EZ Connect SMCWPCI-N2
Brand: SMC Networks Pages: 36
Konig CMP-SATAPCI11 Manual preview
CMP-SATAPCI11
Brand: Konig Pages: 48
CSL 27730/20170302SZ019 User Manual preview
27730/20170302SZ019
Brand: CSL Pages: 40
Sonnet Echo ExpressCard Pro User Manual preview
Echo ExpressCard Pro
Brand: Sonnet Pages: 2
Sonnet Qio MR Professional User Manual preview
Qio MR Professional
Brand: Sonnet Pages: 14
Digitus DS-33103 User Manual preview
DS-33103
Brand: Digitus Pages: 6
Digitus DS-30225 Manual preview
DS-30225
Brand: Digitus Pages: 8
Digitus DS-30201-4 Manual preview
DS-30201-4
Brand: Digitus Pages: 3
Digitus DS-30040-2 User Manual preview
DS-30040-2
Brand: Digitus Pages: 7
Digitus DS-30103 User Manual preview
DS-30103
Brand: Digitus Pages: 16
Digitus DN-7006GT Quick Installation Manual preview
DN-7006GT
Brand: Digitus Pages: 20
Atech Flash Technology PRO-35U User Manual preview
PRO-35U
Brand: Atech Flash Technology Pages: 10
Atech Flash Technology KB-Reader User Manual preview
KB-Reader
Brand: Atech Flash Technology Pages: 16

Brands by name

Popular brands

Load more brands