manualshive.com logo in svg

Alps Electric SPEEDGLIDER, Operator'S Manual

Share
Download
Alps Electric SPEEDGLIDER Operator'S Manual Download Page 2

AIR LOGIC POWER SYSTEMS (ALPS) 

  

NOTICES

 

Notices: 

Documentation 

Air Logic Power Systems, LLC; (ALPS), reserves the right to make changes or improvements to the SpeedGlider 

™

 

Linear Leak Tester at any time. These changes may not be immediately reflected in the manual accompanying your 
system. If you notice any inaccuracies or oversights in this manual, please contact the ALPS Service Department. 
This manual is protected by U.S.  federal copyright laws  ©  2012  Air Logic Power Systems LLC. However, limited 
permission is hereby granted to photocopy portions of this manual for training of company personnel only. No part 
of this manual may be duplicated or transcribed in any form, for any other purpose, except as stated above, without 
expressed written permission from Air Logic Power Systems LLC. 

Software 

Installation of any new or modification of existing software into  the  SpeedGlider  ™  machine  not approved by Air 
Logic Power Systems LLC may adversely affect the operation or performance of the machine and possibly void the 
warranty and or service agreements. Please consult Air Logic Power Systems Service Department prior to installing 
or modifying existing software on this machine. 

System Modifications 

Mechanical or electrical modifications not approved by Air Logic Power Systems LLC to the SpeedGlider ™ system 
may also void the warranty and/or service agreements. Please contact the Air Logic Power Systems Sales or 
Service Department for approval or assistance with any machine modifications. 

Trademark and Patent Acknowledgments 

All products or product names mentioned in the manual are trademarks of their respective companies. The product 
name: SpeedGlider ™ is protected under United States patent laws. 

Contact Information 

Service Department 24 Hour Hotline (US): 1-800-325-8717     (International): 011+800-325-8717 

Service Manager, Ext. 199 
Sales & Customer Service Support, Ext. 188 
Sales Manager, Ext. 184 

Air Logic Power Systems; LLC, Headquarters 
1745 S.38

th

 Street, Suite 100, Milwaukee, WI. 53215-1732 

Phone: 414-671-3332 Fax: 414-671-6645 
Email: www.alpsleak.com and: [email protected]

 

Copyright © 2012 by Air Logic Power Systems, LLC 

 

 

Summary of Contents for SPEEDGLIDER



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands