Alpha CFR 5000 Operator'S Manual Download Page 21

Page: 21 / 88

2 Installation

Alpha Technologies

2.2.2: CFR 5000RM

Tip

: The unit is shipped so that it will fit in a 19 inch rack. To fit in a 23 inch rack, reverse the

position of the mounting brackets.

Tools and Materials Required:

•

Fork lift or other means of transporting heavy objects (up to 225 lbs./102 kg).

•

Screwdriver or power screwdriver with a Philips bit.

Procedure:

The unit is shipped attached to a pallet. Use a forklift to transport the unit and pallet to the

installation site.

Unscrew the box attached to the pallet.

Move the unit to the rack.

Mount it in the rack. The mounting screws are not provided by Alpha. Use the screws speci-

fied for your rack.

Mount an Alpha external battery pack (Section 2.4).

Installation finished

2.2

Installing the Unit (Continued)

Summary of Contents for CFR 5000

























































































Search results

Summary of Contents for CFR 5000

Reviews:

Related manuals for CFR 5000

Brands by name

Popular brands

Alpha CFR 5000, Operator'S Manual

Search results

Summary of Contents for CFR 5000

Reviews:

Related manuals for CFR 5000

Brands by name

Popular brands