Alpha Communications VESTA2 GB2, User Manual, Page: 7 / 29

INSTALLATION OF THE MONITOR IN AN EMBEDDING BOX
Make a hole in the wall to position the top of the universal embedding box at a height of 1.60m from the ground. The
minimum distance between the embedding box and the closest object must be 5 cm.
Positioning the embedding box:
1 6 . 0m
Pass the cable through the hole made in the embedding box. Embed the box and ensure that it is level and $ush.
Fix the terminal block of the monitor with the screws supplied with the embedding box.
Positioning the embedding box and mounting the terminal block:
Positioning the monitor:
Avoid dusty or smoky environments or locations near sources of heat.
Screws supplied with the
embedding box.
7
Connect the cables to the monitor (see page 4), position the monitor perpendicular to the terminal block ensuring that
the holes in the base of the monitor line up with those on terminal block and then move the monitor towards terminal
block until the monitor is #xed with the magnets located on monitor .
Remember to remove the protective covering from the front of the monitor once installation has been
completed.
1
2
3
VESTA2 G 2 MONITOR B
1 2 3