USER MENU
18
VESTA2 G 2 MONITOR
B
Continued from the previous page.
Continued overleaf
2.3 To access the intercom calls within an apartment function
, use push buttons
and
to go to option “Inner call”
and press push button
. The following call screen will be displayed, a long audible tone con#rms the call is being
made. A series of short audible tones indicates the call cannot be made because a monitor in the apartment is
communicating with the door panel. If the call is being made, press option
to cancel the call.
IMPORTANT:
It is recommended to activate function code [8017] in the monitor (see “installer setup” on pages 24 and 25).
During communication
Selection screen
Select
Name List Call
A melody coming from the rest of the monitors in the apartment indicates an incoming intercom call. Press push
button
to accept the call and establish communication or press option
to cancel it. If the call is accepted,
communication will last for one and a half minutes or until push button
is pressed again or option
is pressed.
Making an intercom call
Receiving an intercom call
Call Guard Unit
P
...
lease wait
If during an intercom call there is a call from the door panel, the said intercom call will be cancelled. The monitor will emit a
melody notifying the incoming call and the image will appear on the master monitor. To establish communication with the
door panel press push button
on the monitor. If there are slave monitors in the apartment, press push button
on
either of these.
if during an intercom call there is a call from another apartment, the said intercom call will be cancelled. The monitor will
emit a melody notifying the incoming call and display the address of the apartment making the intercom call, (see
“Intercom calls between apartments” page 15).
The reproduced acoustic tones are different depending on their provenance, which allows the user to distinguish where
the call is made from.
Inner call
Summary of Contents for VESTA2 GB2
Page 1: ......