CHARACTERISTICS
- Hands-free monitor.
- 4.3” TFT colour screen.
- Monitor with simple installation (non-polarised 2 wire BUS).
- Capacitive buttons to access and select menu functions:
User menu:
- Display door panel images.
- Display camera images (D-CAM-GB2 module required).
- Intercom calls between apartments.
- Intercom calls within an apartment.
-
Guard
Calls to the
monitor.
- Do not disturb mode (door panel or intercom calls are not received).
- Divert call (GSM-GB2 module required).
- Settings: Ringtone, ring volume, auto switch-on time and language.
- About: Information, “restore” default setting and access to installer setup.
Installer setup:
- Monitor as master or (Slave 1, Slave 2 or slave 3). Up to 4 monitors per apartment.
- Guard monitor.
- Activate the menu to open the second lock release.
- Allow
the menu
view
when the Bus is busy.
- Activate intercom calls between apartments.
Screen and volume settings menu:
(during auto switch-on or communication).
- Contrast.
- Brightness
- Colo r.
u
- Monitor speaker volume.
- Start/stop communication push button and, in standby, it displays the door panel image.
- Door release push button.
- “Doctor mode” function (automatic door opening).
-
Power supply status LED.
-
“Do not disturb” mode - LED fixed/doctor mode - LED slow blink.
- Different ringtones to identify the origin of the call (door panel, intercom or apartment door).
- Dip switches for setting the monitor address (call code) and end of line.
-
external door bell push button
Input for
.
- Call repeater output (SAR-12/24).
S STEM
Y
OPERATION
- To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being
made and LED
will turn on. If vocal synthesis is activated then a “call
” message will indicate a call is
is in progress
being made. At this moment the apartment's monitor receives the call. During the call the visitor can correct his call by
pressing a push button corresponding to a different apartment, in which case the original call is cancelled.
- The ring tone lasts for 40 seconds. Without alerting the visitor, their image appears on the master monitor to receive
the call. To view the picture on a slave monitor this function must first be activated in the monitor. For
Villa
kit
application: the image appears on the monitor (with code 0 “apartment 1” or monitor with code 16 if the call is in
“apartment 2”) when receiving the call without the visitor being alerted.
If the call is not answered within 40 seconds, LED
will turn off and the channel will be freed.
- To establish communication, press the monitor's push button
and the door panel's LED
will turn on If the vocal
.
synthesis is enabled the message “you can speak now” will be eard confirming the communication is activated.
h
- Communication will last for one and a half minutes or until button
is pressed again. When communication has
finished, LEDs
and
will turn off and the channel will be freed. If vocal synthesis is activated, a “Communication is
finished” message will indicate that the call is over.
- To open the door, press button
during the call or communication processes: one press will activate the lock release
for five seconds and LED
will also turn on for five seconds. If vocal synthesis is activated, a “Door
pen” message
is o
will be indicated on the door panel.
- The descriptions of the function push buttons are found on page 4.
3
VESTA2 G 2 MONITOR
B
Summary of Contents for VESTA2 GB2
Page 1: ......