Alpha Communications VESTA2 GB2, User Manual, Page: 6 / 29

INSTALLATION OF THE MONITOR IN A SURFACE BOX
The upper part of the surface box must be placed at a height of 1.60m. The minimum distance between the sides of the
surface box and the closest object must be 5cm.
Positioning the surface box:
Fix the monitor's surface box to the wall by drilling two 6mm diameter holes and using the screws and plugs supplied
with the monitor.
Fixing the monitor's surface box to the wall:
Positioning the monitor:
1 2 3
Avoid dusty or smoky environments or locations near sources of heat.
x 4 30
6
Connect the cables to the monitor (see page 4), position the monitor perpendicular to the terminal block ensuring that
the holes in the base of the monitor line up with those on terminal block and then move the monitor towards terminal
block until the monitor is #xed with the magnets located on monitor .
Remember to remove the protective covering from the front of the monitor once installation has been
completed
1
2
3
1 6 . 0m
VESTA2 G 2 MONITOR B