ALMAC AlmaCrawler JIBBI 1250 EVO, Translation Of Original Instructions

Page: 79 / 233

PAGE 79 ALMAC s.r.l.
No. Identification Function and Status Description of the function
To select the electric motor, move the
selector downwards.
9 Selector
Antenna movement
control (JIB)
To raise the antenna (JIB), move the selector
upwards keeping it in position;
To lower the antenna (JIB) move the selector
downwards keeping it in position;
Note: This command only works after having
previously activated the aerial part using the
selector 6 (Blue “LIFT selector”).
10 Selector
Winch movement
control (if present)
To lower the hook of the winch, move the
selector downwards keeping it in position;
To raise the hook of the winch, move the
selector upwards keeping it in position.
11
Purple (FAST
DRIVE) button
Fast drive activation
-
Press and release to activate the
Booster.
-
Optional mode: translation control
command with the right Joystick
only.
12 Safety key (KEY)
Safety key for console
activation
Insert the supplied key to activate the console;
If the key is not inserted, the console cannot
be activated;
The key is encrypted so use only the key
provided, otherwise the console cannot be
used.
13 Button (START)
Ignition of machine
and console
1. Press the button to access the radio
control (after releasing the
emergency mushroom);
2. Press the button again to activate
reception (Radio console with
machine); in this way the platform
electrical system is activated;
3. Press the button to activate the
console controls.
14
Green (MANUAL)
Button
Activation of the
manual levelling
controls
Press to activate the manual levelling controls
using the left joystick.
15
Button (Warning
Buzzer) Warning Buzzer
Activation
Press to activate the warning buzzer.
16 Connector
Emergency connector in case of low battery, battery malfunction or
places where radio frequencies cannot be used.
17 Battery Battery necessary for console power supply.
18 Cable
The cable is used under these conditions:
-
Use of radio remote control by cable;
-
Radio control batteries recharge.
Note: The machine can perform two simultaneous movements only if the potentiometer (7)
exceeds 50%; conversely, the platform will only allow one movement at a time.