21
6.3. Adjust date and time
By pressing the corrisponding button and the input of the password afterwards, you can adjust
the date and the time. It is advisable to use correct dates within the control, as the test results
and the sistem happenings are arranged after this criterion.
The date and time stamp is structurated in the form Year/MONTH/DAY/HOUR/MINUTE/SECOND.
6.4. Report-Memory
Within the report-memory all relevant system messages are recorded. This includes next to the
calibration data the change of the load cell and all happenings in which the device specific limits
become exceeded. The information within the meldeste can by indicated within the display by
pressing the corrisponding button and entering the password afterwards.
6.5. Canceling the result-memory
The result-memory gets canceled after pressing the CLEAR-button and entering the
administrator-password afterwards. Canceling the memory can be necessary, especially
if the memory capacity is exhausted. Within most of the menues, the remaining memory
capacity gets indicated within the info-line. Before cancelling the data, you can import them into Exel by
the help of the Fmt_Connect_Software, in this way you can save them everlasting.
7.0 Connection to the PC
The Force Tester FMT-310 can be conected to the serial interface of a PC by the help of a 9-p D-Sub
connection cable (Art.No.: 2054). In this way, by using the software programm FMT-Connect (Art.No.:
FMT-972S) it is possible to transfer measurment date and analyze them in MSExcel. In adition the
Programm Fmt_Connecto PRO (Art.No.: FMT-972P) allows to ex-and import parameter sets as CVS data
files and to edit parameter sets beyond the control.
Futher information can be found within the operation manual of the software Fmt_Connect.
The connection to a PC may be necessary to bring in Software Updates (see chapter 9.3).
To PC’s or Notebook’s without a seriell interface, it is possible to connect an interface adapter with
cable to the control by the help of the USB/RS232. (Srt.Nr. FMT-973USB)
