6
As far as possible, the arrangement of the buttons on the screen is identically. Consecutively the
general construction is outlined:
The headline gives the titel of the actually
retrieved menu. In the footer date, time and the
memory capacity (depending on the menu) and
the number of the version get indicated. The
greeting
Info
gives information about the actual
situation. The navigation bar is placed at the right
border of the screen. It allows to retrieve
submenus, the change of higher menu levels and
the change of settings. At the left border of the
screen the position of the slide and the current
limit settings are indicated. Below and to the right
of the result indication are the buttons for the
handling of the instrument.
4.2.1 Navigationbuttons for oaging and change of the level of the menu
Back
Leaves the actual menu and
turns back to the next higher
level of menu
Scroll back and
forth
The arrow keys right/left
allow to scroll back and forth between
different pages of the same level of menu.
Jump
to
the
first/last page
The arrow keys allow to
jump to the first/last pager of the same level
of menu.
Scroll
To jump line by line within the list
of parameters or results.
ATTENTION: within the manual
mode the arrows indicate only
the movement of the slide per
direction!
List of parameter
After pressing the button appearce
a list of parameteriseable
settings.
Enter - keyboard
By pressing the button the input
box to change the
parameterizeable settings
appearse.
Jump first/last line
The arrow keys allow to jump to
the firs/last record of results of
the same level.
Result menu
By pressing the button a change
into the submenu takes place. The
results of the chosen inspection
process get indicated in the form of a table.
Diagramm
Within the result menu it is
possible to indicate results in
dependence of the inspection
procesws in form of a diagramm.
Testprogramm
Change of the testprogramm
within an inspection process.
Limits
Limit settings for path/force
within the manual mode.
Speed
Setting of the speed levels for the
manual mode.
Testprogramm
Erase of the selected test-
program within an inspection
process.
Jump to MAN
Direct jump from the parameter –
settings of an inspection process
to the MAN area for getting way parameters.
Jump to AUTO
Direct jump from the MAN – area
back to the parameter – setting of
an inspection process.
Analog signals
Input area for setting the external
analog signals.
