12
5.3.4 Predefined test programms
During a test run the relevant dates are indicated on the display. After the test has been finished, the
stored values can be called with the help of the
result-button. If the test procedure effects a
diagramm record, too, the force/path curve of the
list of readings can be indicated by the help of the
diagramm-button.
Substantially the way of representation is equal in all test runs. To effect a detailed representation of
the measured values, it is possible to change the diagramm representation by the help of the following
buttons.
Enlarge y-axle with
readings of
measurment of force
Minimise y-axle with
readings of
measurment of force
Enlarge x-axle with
readings of
measurment of
length
Minimise x-axle with
readings of
measurment of
length
The recorded force values are placed on the y-axle, the corrisponding position values on the x-axle. The
scaling of the diagram takes automatically place on the base of the size of the values and the nuber of
recorded readings. Due to the size of the display the representation of measurment results is limited.
For an advanced evaluatio it is advisable to import the dates into MsExcel with the help of the download
– programm FMT-Connect (Art. Nr. FMT-972S) and to them up there.
To be able to work with the predefined test procedures, the parameter for the corrisponding test
programm have to be setted.
