Fluo-100 Portable Fluorometer Operation Manual
Chapter 4
Installation
4
Chapter 4
Installation
4.1 Opening Check
Each Fluo-100 has been inspected strictly before packing and transportation. Please check
again when you receive it.Contact with your local distributor or manufacturer in case of:
The package inverted or deformated
The package has an obvious stains of water
The package has marks of impact
The package has been opened
Please check instrument and accessories if package is sound and intact.
Check all accessories according to the packing list
Check instrument appearance if there is cracks,damage or deformation
4.2 Installation Conditions
Put on the dry, clean and horizontal worktable
Working conditions:
Clean air without corrosion steam or dust
Temperature b10°C to +40°C
4.3 Installation Steps
1. Take out the instrument on the worktable slowly and gently.
2. Switch off the instruments with the button on the back of instrument. Take out the 12V 1A
power adapter and plug it into the socket on the back of instrument. Then connect another
side to AC100~200V power supply.
3. Instrument will start to self-testing after power on, then get ready for assay.
4.4 Operating Considerations
Cuvettes, 0.2ml fluorescence PCR tube and 0.5ml fluorescence PCR tube can be used for
sample test on Fluo-100.
