Fluo-100 Portable Fluorometer Operation Manual
Chapter 4
Installation
5
NOTE:
Fluorescence PCR tube should be used with tube base together.
Sample test steps
：
1. Insert PCR tube base first, as fig4.1.
2. Insert fluorescence PCR tube into tube base.
3. Close lid;Click “detecting” for testing.
Fig4.1 Sample Test Steps
To insure the effect of test results,volume of sample should be 3ml for cuvette,o.1ml for
0.2ml fluorescence PCR tube,and 0.2ml for 0.5ml fluorescence PCR tube.
Please use corresponding solvent diluting sample to reach the require volume if sample is
not enough. Pay attention to that concentration range should be within the limit of detection,
and the sample volume should be equal to volume of standard curve.
Fluorescence PCR tube
PCR tube base
