Fluo-100 Portable Fluorometer Operation Manual
Chapter 5
Software Introduction
14
concentration and fluorescence values (Fig5.15).
Fig5.15 Home>dsDNA>Standard Curve
>
Curve Fitting
NOTE:
Fluorescence detection without setting concentration is available while the
fluorescence value will not be saved. There are at most three average fluorescence values
that can be used for fitting standard curve and one average value at least.
Check standard curve. Check standard curve when fluorescence values of
standard sample are over three(Fig 5.16).
Fig5.16 Curve Checking
Click
to check current curve, sample number, concentration and corresponding
fluorescence values.
Click
to check list of concentration and fluorescence values of standard sample.
Click
to choose the mode of curve fitting. There are three modes: Linear, Cubic
Curve &
Sample Name
Sample
Concentration
Fluorescence Value
One Time
Average
Fluorescence Value
Standard Sample
Quantity
