Fluo-100 Portable Fluorometer Operation Manual
Chapter 5
Software Introduction
7
Report Interface,for looking up all history test datas according to different sorts.
System Settings Interface,do a series of normal settings.
In the interface of home interface, there are six icons:
: Fluorescence detection;
: dsDNA detection;
: RNA detection
；
: Protein detection;
: Oligo detection
；
: Custom detection
；
Click Fluorescence Detection icon; Choose fluorescence channel to fluorescence detection.
There is only fluorescence detecting without curve building or concentration analysis. But
you can set and calibrate standard curve, detect sample by clicking the other five icons. The
function of the five icons is same. It is convenient for you to manage datas of different kinds
of sample.
5.2.1 Fluorescence Detection
Click icon “Fluorescence” to enter fluorescence detection interface (as Fig5.3)
：
Fig5.3 Home>Fluorescenter
In this interface fluorescence detection channel is optional. There are two detection modes
in each channel: normal (single) detection mode and kinetic (continuous) detection mode.
NOTE:
There are two channels in the device, thus detection channel should be selected
before detecting. Choose the detection channel according to excitation and emission
