Chapter 4: Redundancy
NetEnforcer AC-2500 Hardware Guide
4-6
To set redundancy mode:
go config network -redund_mode
•
Options are:
o
parallel
o
active
o
serial
For example:
go config network –redund_mode parallel
To toggle redundancy:
go config network –bypass_unit
•
Options are:
o
enable
o
disable
For example:
go config network –bypass_unit enable
Configuring the AC-2540 via NetXplorer
1.
Log into NetXplorer
2.
Right click the NetEnforcer you wish to configure in the Navigation Pane.
3.
Select
Configuration
from the drop down menu.
4.
Open the
NIC
tab and in the
Action on Failure
field, set INTERNAL1,
EXTERNAL1, INTERNAL3 and EXTERNAL3 to
fail paired port
.
