Chapter 3: Setting Up the NetEnforcer
NetEnforcer AC-2500 Hardware Guide
3-2
To connect a terminal to the NetEnforcer:
1.
Use the supplied serial cable to connect the terminal to the Console Connector on
the front panel of the NetEnforcer.
2.
Connect the power cable and power up NetEnforcer, as described in Powering Up,
page 1-23.
3.
At the terminal, select
Start > Programs > Accessories
and double-click on the
HyperTerminal
icon. Enter a name for the session and then to set the com port
and the parameters (see above). The system boots up and you are prompted for a
login and a password.
4.
Enter
admin
for the login and
allot
for the password. (To change the password, see
page 3-8.)
5.
Press
<Enter>
. The NetEnforcer Setup Menu is displayed:
Figure
3-1 – NetEnforcer Setup Menu