Chapter 1: AC-2500 Series Hardware
NetEnforcer AC-2500 Hardware Guide
1-17
The following procedure describes how to connect a Double Copper Bypass Unit to
NetEnforcer AC-2520.
Figure
1-8 – Connecting the NetEnforcer AC-2520 to Double Copper Bypass Unit
To connect the Double Copper Bypass to the NetEnforcer:
NOTE
For important information regarding cable and connector types, see
Cabling on p. 1-12.
1.
Connect the External cable from the To NetEnforcer External port (Link 1) on the
Bypass Unit to the External port on the NetEnforcer (Link 1).
2.
Connect the Internal cable from the To NetEnforcer Internal port (Link 1) on the
Bypass Unit to the Internal port on NetEnforcer (Link 1).
3.
Connect the External cable from the External port on the Bypass Unit, to a router
(1000Base-T) connector.
To Internal
Switch
To External
Router
To Internal
Switch
To External
Router