Chapter 1: AC-2500 Series Hardware
NetEnforcer AC-2500 Hardware Guide
1-11
Management Port Status Indicators
Management Port Status Indicators – AC-2500 Series
The modes of operation of the Management port LEDs are described in the table below.
Mgmnt LED
NetEnforcer Status
Green
A lit green LED indicates that a link is detected.
Orange
A blinking red LED indicates that traffic is detected on the
interface.
Off
An unlit LED indicates that neither links nor activities were
detected.
Table
1-3 –Management LED Conditions
Console Port
The Console Port allows the connection of a PC to the NetEnforcer in order to monitor
or configure the unit via the Command Line Interface (CLI)
Power Cable Connectors
The unit power cables (AC or DC) plug in here. The power cables should not be
removed while swapping the power modules.
CAUTION
This equipment has a connection between the earthed conductor of the DC
supply circuit and the earthing conductor. Before connecting the product to
the power line, make sure that the protective ground terminal of the device is
connected to the safety ground conductor of the mains power cord. The
mains plug should only be inserted in a socket outlet provided with a
connected safety ground. The protective action must not be negated by use
of an extension cord (power cable) without a protective conductor
(grounding). Any interruption of the protective (grounding) conductor or
disconnection of the protective ground terminal can make the device unsafe
to use. Intentional interruption is prohibited.
