Chapter 3: Setting Up the NetEnforcer
NetEnforcer AC-2500 Hardware Guide
3-6
3.
Enter values for the following IP parameters:
Device IP Address
The IP address for your NetEnforcer, for example,
10.1.18.7.
Network mask
The network mask for your NetEnforcer, for
example, 255.0.0.0.
Device Hostname
The host name for your NetEnforcer, for example,
Jonny2.
Domain name
A domain name for your NetEnforcer, for example,
allot.com. Do not provide a leading ‘.’.
Default gateway IP address
The IP address of your default gateway, for
example, 10.0.0.2. If you do not have a default
gateway, enter NONE.
Primary name server IP
address
If you have a Domain Name Server (DNS), its IP
address. If you do not have a DNS, enter none.
Secondary name server IP
address
If you have a second DNS, its IP address. If you do
not have a second DNS, enter none.
VLAN ID, or NONE
[NONE]
Allows the mgmt port to be connected to a
VLAN tagged interface.
CAUTION
: Misconfiguring this parameter will
result in a loss of connection to the NetEnforcer.
The Ethernet Adapter Settings screen is displayed.
4.
Enter the following parameters to set up the NetEnforcer Ethernet
adapters:
•
The duplex type for the Internal interface. Enter
full
for full duplex,
half
for
half duplex or
auto
for AutoSensing.
•
If you selected full or half duplex, enter the link speed of the Internal interface,
10M
or
100M
. Use
M
for Mbps.
