Camera Link registers
94
Goldeye Camera Link Register Controls Reference V1.0.0
DefectPixelCorrection (subcategory)
The pixels of InGaAs sensors may show abnormal behavior in dark offset, photo
response, or dynamic noise, respectively. The result is an excessively reduced
dynamic range. These pixels are counted as defect pixels.
This category handles all functionalities necessary to apply the defect pixel
correction (DPC). Refer to the Goldeye G/CL Technical Manual for a description of
how the defect pixel correction is applied.
RegDPCDatasetActive
The index of the active data set, starting at 0. Writing to this register changes the
active data set, meaning it activates the data set indexed.
The maximum value allowed depends on the number of valid data sets in the
camera and is reported by
RegDPCDatasetCount
. The mapping of an index value
to a specific correction data file may vary from camera to camera or after
correction data modifications.
Use
RegDPCDatasetSelector
and corresponding functionalities to retrieve more
information about the data sets.
Display name
AutoModeParameters
Origin of
functionality
Camera
Control type
(Subcategory)
Category
/ImageCorrectionControl
Register name
RegDPCDatasetActive
Register type
IntReg
Access mode
R/W
Address
0x00090204
Length (Bytes)
4
Bits used
31..0
Possible values
Description
(Camera dependent)
Default
0
Minimum
(Camera dependent)
Maximum
