Camera Link registers
44
Goldeye Camera Link Register Controls Reference V1.0.0
RegTriggerInq...
Shows which trigger functionalities are supported by the camera.
RegTriggerDelay[ ]
The actual start of the image capture can be delayed to begin some time after a
trigger event is received by the camera. This functionality is valid only when
TriggerSource is set to external trigger (i.e. LineIn1, LineIn2). This control
functionality is e.g. useful, when syncing with a strobe lighting source, which will
inherently have some fixed setup time.
Register name prefix
RegTriggerInq...
Register type
MaskedIntReg
Access mode
R
Address
0x00013400
Length (Bytes)
4
Bits used
31..30
Bit assignment:
Bit
Name and description
30
...Delay
Contains
1
if trigger delay is supported.
31
...Event
Contains
1
if trigger event generation is supported.
Register name
RegTriggerDelay[]
Register type
Array of FloatReg
Access mode
R/W
Unit
Microseconds
Addresses
0x0001341C for
FrameStart
trigger
0x000134DC for
AcquisitionStart
trigger
0x0001351C for
AcquisitionEnd
trigger
Length (Bytes)
4
Bits used
31..0
Possible values
Description
0
Default
0
Minimum
(Camera dependent)
Maximum
