Camera Link registers
75
Goldeye Camera Link Register Controls Reference V1.0.0
RegStrobe1Source
Associates the start of strobe signal with one of the following signals:
For detailed information see the camera waveform diagrams provided in the
Goldeye G/CL Technical Manual.
Register name
RegStrobe1Source
Register type
MaskedIntReg
Access mode
R/W
Address
0x00015144
Length (Bytes)
4
Bits used
31 .. 1
Enumeration values:
Value
Name and description
1
AcquisitionTriggerReady
Active once the camera has been recognized by the host computer and
is ready to start acquisition
2
FrameTriggerReady
Active when the camera is in a state that will accept the next frame
trigger
3
FrameTrigger
Active when an image has been initiated to start. This is the logic
trigger signal inside of the camera. It is initiated by an external trigger
or software trigger.
4
Exposing
Active for the duration of sensor exposure.
5
FrameReadout
Active during frame readout, i.e. the transferring of image data from
the sensor to camera memory.
7
Acquiring
Active when acquisition start has been initiated.
8
LineIn1
Active when there is an external trigger at Line1.
9
LineIn2
Active when there is an external trigger at Line2.
