Document history and conventions
33
Alvium CSI-2 Cameras User Guide V2.8.1
GenICam for CSI-2 Access
Selected Alvium 1800 C models support
GenICam for CSI-2 Access
on page 194. Data in this document applies to all Alvium CSI-2 cameras if
not otherwise stated. Data applying to
GenICam for CSI-2 Access
is marked as
follows:
Naming and terms
Controls and features
Most functionalities for Alvium CSI-2 cameras are available as controls, using
Direct Register Access
or
Video4Linux Access
. Equivalent functionalities are
available as features, using
GenICam for CSI-2 Access
, adding some more
functionalities.
Gain Auto
in the Alvium CSI-2 Register Controls Reference equals
GainAuto
in the Alvium Features Reference.
In this user guide, data relating to features applies to the corresponding controls as
well, unless otherwise stated. Therefore, the terms
Control
and
Feature
are used
equivalently in this user guide.
ROI and cropping
Cropping is a functionality similar to ROI (region of interest). By using a reduced
area of the available sensor, the payload is reduced, increasing frame rates.
Paragraphs and graphics
A gray box with this icon signals that contents apply to
GenICam for CSI-2 Access
only.
Specification headlines
This icon signals that camera models support
GenICam for CSI-2 Access
(in addition to the other access modes).
Tables
Red table boarder lines
signal that data applies to
GenICam for CSI-2 Access
only:
Feature
Specification
Feature 1
This specification applies to
all access modes
.
Feature 2
This specification applies to
GenICam for CSI-2 Access
only.
GenICam
for CSI-2
Access
GenICam
for CSI-2
Access
