Allied Vision Technologies AVT Pike Series Technical Manual Download Page 236

Page: 236 / 372

Video formats, modes and bandwidth

PIKE Technical Manual

V5.0.0

236

In addition to the AOI, some other parameters have an effect on the maxi-
mum frame rate:

•

the time for reading the image from the sensor and transporting it into
the FRAME_BUFFER

•

the time for transferring the image over the FireWire™ bus

•

the length of the exposure time.

Figure 112: Area of interest (AOI)

Note



•

The left po width and the upper position
+ height may not exceed the maximum resolution of the
sensor.

•

The coordinates for width and height must be divisible
by 4.

Summary of Contents for AVT Pike Series





















































































































































































































































































































































































Search results

Summary of Contents for AVT Pike Series

Reviews:

Related manuals for AVT Pike Series

Brands by name

Popular brands

Allied Vision Technologies AVT Pike Series, Technical Manual

Search results

Summary of Contents for AVT Pike Series

Reviews:

Related manuals for AVT Pike Series

Brands by name

Popular brands