Description of the data path
PIKE Technical Manual
V5.0.0
164
Binning and sub-sampling access
The binning and sub-sampling modes described in the last two chapters are
only available as pure binning or pure sub-sampling modes. A combination
of both is not possible.
As you can see there is a vast amount of possible combinations. But the num-
ber of available Format_7 modes is limited and lower than the possible com-
binations.
Thus access to the binning and sub-sampling modes is implemented in the
following way:
•
Format_7 Mode_0
is fixed and can not be changed
•
A maximum of 7 individual AVT modes can be mapped to
Format_7
Mode_1
to
Mode_7
Figure 96: Mapping of possible Format_7 modes to F7M1...F7M7
•
Mappings can be stored via register (see Chapter
on page 344) and are uploaded automatically into the camera on
camera reset.
•
The
default settings
(per factory) in the Format_7 modes are listed in
the following table
Format_7
PIKE monochrome cameras Format_7
PIKE color cameras Format_7
Mode_0
full resolution, no binning,
no sub-sampling
full resolution, no sub-sampling
Mode_1
2 x
horizontal
binning
---
Mode_2
2 x
vertical
binning
---
Mode_3
2 x
full
binning
---
Mode_4
2 out of 4
horizontal
sub-sampling
2 out of 4
horizontal
sub-sampling
Mode_5
2 out of 4
vertical
sub-sampling
2 out of 4
vertical
sub-sampling
Mode_6
2 out of 4
full
sub-sampling
2 out of 4
full
sub-sampling
Table 45: Default Format_7 binning and sub-sampling modes (per factory)
Note
•
A
combination
of binning and sub-sampling modes is
not possible
.
Use either pure binning or pure sub-sampling modes.
•
The Format_ID numbers 0...31 in the binning /
sub-sampling list do
not
correspond to any of the
Format_7 modes.
