Allied Vision Technologies AVT Pike Series Technical Manual Download Page 242

Page: 242 / 372

Video formats, modes and bandwidth

PIKE Technical Manual

V5.0.0

242

Frame rates Format_7

In video Format_7 frame rates are no longer fixed.

Details are described in the next chapters:

•

Max. frame rate of CCD (theoretical formula)

•

Diagram of frame rates as function of AOI by const. width: the curves
describe RAW8, RAW12/YUV411, RAW16/YUV422, RGB8 and max. frame
rate of CCD

•

Table with max. frame rates as function of AOI by constant width

Note



•

Different values apply for the different sensors.

•

Frame rates may be further limited by longer shutter
times and/or bandwidth limitation from the IEEE 1394
bus.

Note



CCD =

theoretical max. frame rate (in fps) of CCD
according to given formula

maxBPP= 8192 according to IIDC V1.31

maxBPP: for explanation and configuration see Chapter

Maximum ISO packet size

on page 337

Summary of Contents for AVT Pike Series





















































































































































































































































































































































































Search results

Summary of Contents for AVT Pike Series

Reviews:

Related manuals for AVT Pike Series

Brands by name

Popular brands

Allied Vision Technologies AVT Pike Series, Technical Manual

Search results

Summary of Contents for AVT Pike Series

Reviews:

Related manuals for AVT Pike Series

Brands by name

Popular brands