Allied Vision Technologies AVT Pike Series, Technical Manual

Page: 15 / 372

Introduction
PIKE Technical Manual V5.0.0
15
continued from last page
V4.1.0 20.08.08 Added PIKE F-505 to Chapter Index on page 362
Revised formulas by adding some units in Chapter How does
bandwidth affect the frame rate? on page 270
Corrected Table 164: Advanced register: Channel balance on
page 334
Added Max IsoSize Bit [1] to register 0xF1000048 ADV_INQ_3
in
Table 145: Advanced register: Advanced feature inquiry on
page 313f.
Added Chapter Maximum ISO packet size on page 337 (useful
for PIKE F-505 for higher frame rates)
Corrected Figure 97: Former standard timing on page 166
Added photos of 1394b locking connectors and 1394a Molex
clamp locking (aka Interlock) connectors in Chapter
1394a and
1394b cameras and compatibility on page 35.
Added recommendation to use PCI-X (64 bit) or PCI Express
adapter in Chapter
Maximum ISO packet size on page 337.
Corrected frame rate formula in Chapter High SNR mode (High
Signal Noise Ratio) on page 172.
Corrected binning order in Chapter 2 x full binning/4 x full bin-
ning/8 x full binning on page 156.
Added block diagram of modern PC (X38 chipset by INTEL) in
Figure 5: Block diagram of modern PC (X38 chipset by INTEL)
on page 39
Revised FireWire hot-plug precautions and added screw-lock
precautions in Chapter
FireWire hot-plug and screw-lock pre-
cautions on page 42
Added images of FireWire locking cables in Figure 4: 1394a and
1394b cameras and compatibility on page 35
Added list of available FireWire screw lock cables in Table 4:
1394 locking cables on page 35
Corrected CAD drawing in Figure 14: Pike W90 S90 (2 x 1394b
copper) on page 54
Changed provisions directive to 2004/108/EG in Chapter Con-
formity on page 29
Corrected diag. (16.3 mm) of KAI2093 in Table 18: Specifica-
tion PIKE F-210B/C (fiber) on page 84
to be continued on next page
Version Date Remarks
Table 1: Document history